Mossberg 935 Magnu Manuel d'utilisateur télécharger pdf (Page 15)

TRIGGER HOUSING ASSEMBLY REMOVAL

1. Push out the two trigger housing retaining pins using a blunt object no

larger than 1/8" diameter (Figure 12). (The pins can be pushed out from

either direction).

2. Remove the trigger housing assembly by pulling it straight out of the

receiver.

The trigger housing assembly is a complex assembly and must not be

disassembled. Disassembly should only be performed at an authorized

Product Service Center or by a qualified gunsmith.

Do not pull the trigger and allow the hammer to fall when the trigger

housing assembly is removed from the receiver. To do so may result in

personal injury or damage to the assembly.

Field disassembly is now complete. The firearm should not be disassembled

any further for routine cleaning or maintenance. Further disassembly should

only be performed at an authorized Product Service Center or by a qualified

gunsmith.

Figure 12

122276 1/19/12 2:37 PM Page 13

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Mossberg 935 Magnu Manuel d'utilisateur Page 15