Mossberg 935 Magnu Manuel d'utilisateur télécharger pdf (Page 7)

Figure 4

The bolt is always under spring pressure. When the bolt release is

pushed with the bolt locked rearward, the bolt is driven forward toward

the muzzle with considerable force. Do not have fingers or other objects

in the ejection port or near the operating handle.

Visually and physically inspect the chamber and bore of the barrel to

make certain it is free of any obstructions, excessive oil or grease. If you

are unable to remove any obstruction, bring the firearm to a qualified

gunsmith or send it to a factory authorized Product Service Center.

Obstructions of any kind can result in damage to the firearm and/or serious

personal injury to you or those around you when the firearm is fired.

TO CLOSE THE ACTION

Keep fingers clear of the operating handle and the ejection port when

closing the action. (Figure 4)

With the safety button fully rearward in the “ON” (SAFE) position, and the muz-

zle pointed in a safe direction, press the bolt release until the action releases

(Figure 4).

TO REMOVE THE MAGAZINE PLUG (NON SPX MODELS)

Be sure the firearm is unloaded by visually and physically checking

the chamber, elevator, and magazine tube. Make certain that the safety but-

ton is fully rearward in the “ON” (SAFE) position before performing any

assembly or disassembly procedure.

Unscrew and remove the magazine cap (Figure 9). Grasp the barrel and forearm to

prevent them from sliding forward. Do not place your hand over the muzzle at any

time. Point the muzzle downward and shake the firearm in an up and down motion

until the wooden dowel falls through the opening at the end of the magazine tube.

122276 1/19/12 2:37 PM Page 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Mossberg 935 Magnu Manuel d'utilisateur Page 7